4.1 0.23 serial

Note : Student may choose to issue the command no passive-interface default. This solves the adjacency issue with R2 but would open the router up to possible undesired adjacencies if there were more L3 interfaces configured. Your company hired an outside security consultant to work on the network. His task was to ensure that routing was being done securely. After he completed h is work , R2 stopped sharing route information about networks at R1. Answers Note : Commands for creating these files are at the end of this document.

This trouble ticket contains 1 intentional error. R2 has a distribute list that is blocking t he networks. The distribute list should be removed. Topology Update:. Addressing Table Update:. Loopback 1. This trouble ticket contains 1 intentional error , which is repeated in three places. D2 config no router eigrp D 2 config router eigrp 4 D2 config- router eigrp router-id D2 config- router network D2 config- router exit. D2 config- if ip authentication mode eigrp md5.

D2 config- if ip authentication key-chain eigrp security. D2 config- if exit. D2 config- if e nd. Router Model. Ethernet Interface 1. Ethernet Interface 2.

Serial Interface 1. Serial Interface 2. Note : To find out how the router is configured, look at the interfaces to identify the type of router and how many interfaces the router has. There is no way to effectively list all the combinations of configurations for each router class.

This table includes identifiers for the possible combinations of Ethernet and Serial interfaces in the device. The table does not include any other type of interface, even though a specific router may contain one. The string in parenthesis is the legal abbreviation that can be used in Cisco IOS commands to represent the interface. End of document. He couldn't bear the cold of Alaska after living in the heat of Texas. He has been accused of theft, but we Weegy: A person who is Underweight is 15 to 20 percent below ideal body weight.

Questions 1 Fill in the blank space with an antonym of the Wind erosion is most common in flat, bare areas Fill in the blank. The atomic mass of the most common isotope of Weegy: The atomic mass of the most common isotope of carbon is 12 or A stream s You'll also have to add a line describing the path to your StreamDevice support. For example:. Verify that the IDNwf record description looks like:. This seems like a reasonable place to put this file since it's tied closely to its associated database file.

Now that a device support module has been produced it is a good idea to create a new EPICS application to confirm that the device support is operating correctly. The easiest way to do this is with the makeBaseApp. Here's the file that I use:. You would also change the application Makefile to specify drfvVxi The application can be started by running the startup script if you make the script executable:.

If the stringin record has truncated the identification string you should be able to see the full string as a waveform record. In another window run:. The asynRecord provides a convenient mechanism for controlling the diagnostic messages produced by asyn drivers.